Essex · CM13, CM14, CM15
Alloy wheel refurbishment in Brentwood
Brentwood is twenty minutes across on the A129 and sends us a lot of high-end work. The cars here are exactly what our lathe exists for: large diamond-cut wheels on German and British metal, where a single replacement is a four-figure conversation and a proper refurb is not. We do a lot of gloss black and satin anthracite conversions for Brentwood customers, usually with the calipers done to match.
- From Brentwood
- 11 miles
- Drive time
- ~22 min
- Postcodes
- CM13, CM14, CM15
- From
- £75 / wheel
The run from Brentwood
A129 east through Billericay into Wickford, or the A127 if you would rather have dual carriageway. Around twenty-two minutes.
There is no travel charge and no premium for coming from outside Wickford — the price is the price. If 11 miles is an awkward round trip to do twice, bring the wheels loose instead: four in the back of an estate or a van works perfectly well, and plenty of our Brentwood customers do exactly that.
What we do for Brentwood cars
Everything happens at Unit 40 — nothing is sent away and nothing is subcontracted. That matters most for the two jobs a mobile repairer genuinely cannot do: diamond cutting, which needs a CNC lathe, and crack welding, which needs a TIG set and a pressure test.
- Full refurbishment — chemically stripped to bare metal, repaired, powder coated and oven-cured. From £75 a wheel.
- Diamond cutting — on our own lathe, with a corrosion-inhibiting lacquer. The fix for wheels that have gone cloudy or milky.
- Crack repair — veed out, TIG welded, machined back and pressure-tested. A cracked wheel is an MOT failure.
- Buckle straightening — runout measured, not guessed. This is what that vibration at 60 usually is.
- Caliper painting — calipers off the car, stripped and coated properly. The obvious moment to do it is while the wheels are already off.
- Locking nut removal — no key needed. From £20 per wheel.
We also run the tuning side out of the same unit — Stage 1 remapping written for your exact engine, plus proper DPF and AdBlue diagnosis. Check what your car should make.
Questions from Brentwood
Do you cover Brentwood?
Yes. Brentwood is about 11 miles from our Wickford workshop — roughly 22 minutes. A129 east through Billericay into Wickford, or the A127 if you would rather have dual carriageway. Around twenty-two minutes.
How far is Wheel Masters from Brentwood?
11 miles, around 22 minutes on a normal run. A129 east through Billericay into Wickford, or the A127 if you would rather have dual carriageway. Around twenty-two minutes. We are at Unit 40, Andersons Industrial Estate, Lower Park Road, Wickford, SS12 9EJ.
Can I drop the wheels off without the car?
Yes, and from Brentwood a lot of customers do exactly that — four wheels in the back of an estate saves you doing the drive twice. Just make sure the locking wheel nut key comes with them if you have one.
How much does it cost from Brentwood?
The same as anywhere — from £75 per wheel, with no travel charge. Price moves with wheel size, finish choice and whatever turns up once the old coating is off. We call you before anything changes the number.
Nearby
Brentwood to Wickford — about 22 minutes
Standard powder-coated wheels in by 9am are usually ready the same day. Send a photo first and we will tell you what it needs before you set off.