East London · IG6
Alloy wheel refurbishment in Barkingside
Barkingside is about thirty-five minutes from us. It is a comfortable IG6 postcode where the cars run large diamond-cut wheels and replacement quotes run to four figures per corner — which is exactly when a proper refurb makes obvious sense. We skim on the lathe, re-lacquer and cure in the oven, and the result is a wheel that looks factory rather than repaired.
- From Barkingside
- 21 miles
- Drive time
- ~34 min
- Postcodes
- IG6
- From
- £75 / wheel
The run from Barkingside
A12 or A123 to the A127, then east and north on the A132. Around thirty-four minutes.
There is no travel charge and no premium for coming from outside Wickford — the price is the price. If 21 miles is an awkward round trip to do twice, bring the wheels loose instead: four in the back of an estate or a van works perfectly well, and plenty of our Barkingside customers do exactly that.
What we do for Barkingside cars
Everything happens at Unit 40 — nothing is sent away and nothing is subcontracted. That matters most for the two jobs a mobile repairer genuinely cannot do: diamond cutting, which needs a CNC lathe, and crack welding, which needs a TIG set and a pressure test.
- Full refurbishment — chemically stripped to bare metal, repaired, powder coated and oven-cured. From £75 a wheel.
- Diamond cutting — on our own lathe, with a corrosion-inhibiting lacquer. The fix for wheels that have gone cloudy or milky.
- Crack repair — veed out, TIG welded, machined back and pressure-tested. A cracked wheel is an MOT failure.
- Buckle straightening — runout measured, not guessed. This is what that vibration at 60 usually is.
- Caliper painting — calipers off the car, stripped and coated properly. The obvious moment to do it is while the wheels are already off.
- Locking nut removal — no key needed. From £20 per wheel.
We also run the tuning side out of the same unit — Stage 1 remapping written for your exact engine, plus proper DPF and AdBlue diagnosis. Check what your car should make.
Questions from Barkingside
Do you cover Barkingside?
Yes. Barkingside is about 21 miles from our Wickford workshop — roughly 34 minutes. A12 or A123 to the A127, then east and north on the A132. Around thirty-four minutes.
How far is Wheel Masters from Barkingside?
21 miles, around 34 minutes on a normal run. A12 or A123 to the A127, then east and north on the A132. Around thirty-four minutes. We are at Unit 40, Andersons Industrial Estate, Lower Park Road, Wickford, SS12 9EJ.
Can I drop the wheels off without the car?
Yes, and from Barkingside a lot of customers do exactly that — four wheels in the back of an estate saves you doing the drive twice. Just make sure the locking wheel nut key comes with them if you have one.
How much does it cost from Barkingside?
The same as anywhere — from £75 per wheel, with no travel charge. Price moves with wheel size, finish choice and whatever turns up once the old coating is off. We call you before anything changes the number.
Nearby
Barkingside to Wickford — about 34 minutes
Standard powder-coated wheels in by 9am are usually ready the same day. Send a photo first and we will tell you what it needs before you set off.